Laboratories
Stable humidity for accurate results
Why is humidity important for clean rooms and laboratories?
Many experiment or tests are required to be conducted according to very specific environment conditions with very specific and very tight humidity levels. Humidity levels above 45%RH will prevent not only electrostatic discharge but also will avoid any flying dust in clean room. Humidity levels above 45%RH is required for biology laboratories.
Recommended humidity level for your clean room and laboratory
Humidity is one of the most critical air-quality factors in cannabis cultivation, yet it’s often poorly managed. Too much humidity promotes mold that can ruin entire crops, while too little stresses plants and can lead to die-off.
- The recommended humidity level for clean room is 45 +/-3% RH. (Reference: ASHRAE Handbooks)
- Some specific and more stringent humidity level might be required depending on the type of experiment conducted in the laboratory.
Key Considerations When Selecting a Humidification System
Precise humidity control—often within ±1% RH—is essential in clean rooms and labs to ensure stable, 24/7 conditions during long test cycles.
- Maximum humidification capacity required
- Available energy sources on site
- Ability of the technology to achieve required RH accuracy
- Ventilation layout and air-distribution method
- Total HVAC energy consumption (system-wide efficiency)
- Need for redundancy if humidity control is critical
Key Considerations When Selecting a Humidification System
Precise humidity control—often within ±1% RH—is essential in clean rooms and labs to ensure stable, 24/7 conditions during long test cycles.
- Maximum humidification capacity required
- Available energy sources on site
- Ability of the technology to achieve required RH accuracy
- Ventilation layout and air-distribution method
- Total HVAC energy consumption (system-wide efficiency)
- Need for redundancy if humidity control is critical
Key Benefits
- Tight humidity control (e.g., 35±3% RH for tablet coating) prevents coatings from drying too fast or slow, ensuring quality.
- IER humidifier delivers ±1% RH accuracy for 24/7 production in powder storage, milling, and capsule areas.
- Uses on-site RO-treated water without extras, matching pharmaceutical purity standards seamlessly.
- Choose based on capacity, energy sources, and HVAC efficiency for specific needs like colloids (30-50% RH).
- ILS for clean boiler steam or ISE for pure atmospheric steam with minimal maintenance.
IER electric steam humidifier
- IER is using resistive immersed heater technology with a stainless steel cylinder. This cylinder will last for ever.
- EcoEnerSmart™ patented function saves water and energy (more information). Water mineral deconcentration is automatically adapting to water conditions from day one through the life of the humidifier.
- Stainless steel cylinder is thermally insulated.
- Power usage is displayed in real time on the Dashboard screen.
ISE steam exchange
- Constant and precise steam production +/-1%RH.
- Unique design with the power of board computer and user friendliness of 7in touch screen (industry largest).
- Accepts all control signals and range avalaible in the HVAC industry.
- Modbus RTU is standard, BACnet MS-TP (RS485) is optional.
- Real time scheduler allows for operation adapted to specific time schedule.
- Multilingual and multi-units display.
- EcoEnerSmart™ function will adapt automatically water dilution to water quality There is no more need for chemistry degree or water quality analysis to set up drain frequency.
ILS Live steam humidifier
- 1 to 100% fully modulating steam production.
- 0-10Vdc or 2-10Vdc control signal on 24Vac actuated control valve
- Interlock with Air Proving switch and RH% Hi-Limit humidistat
- Optional safety condensate thermostat (model KCT)
- Peace of mind for start-up and operation.
- Optional BACnet remote control